Electric Heat Tracer

Product Details:

SLSR heat tracer consists of an irradiated carbon film between two copper bus conductors. Any increase in temperature of the tape increase the resistivity of the carbon film, thus reducing the heat generated per unit length. Any change in product temperature or variation in ambient temperature will change the energy input to the system. Thus it is able to regulate the energy when and where it is needed.

As the heat output at any point depends upon temperature at that point, there is no possibility of ‘Hot-Spot’ or burn out of tracer. Self-regulating cables are flexible, can be cut-to-length in the field and can be single overlapped without fear of burnout in areas where complex piping and equipment require additional heat trace cable.

Features and characteristic of Self Limiting tracers offers a reliable and easy way to heat trace pipes with pumps, valves, flanges and instruments without fear of burnout or under heating.

 

Product Details:

Drain heater or Heat tracer are used for industrial application, such as small diameter pipe, process pipe, valves, fitting of irregular profiles and complicated pipe lengths. They are mainly used for heating of various industrials mediums such as water, oil, liquid and gases to maintain the temperature of contents. Our range of tape heater is constructed of a glass braid with overall stainless-steel gives high degree of electrical and mechanical strength. These heat tracers are supplied as a complete unit termination at one end. No cutting or splicing and making joints at site are not required.

Product Details:

Constant Watt Parallel Resistance (CTL) tracers are designed to deliver a constant power throughout the length irrespective of working temperature.

CTL tracers consist of nichrome wire heating element wound on two silicon rubber insulated copper bus conductors. Contact of heating element with bus wire is maintained at a specific distance by removing insulation for a short length. An overall silicon rubber sheathing is provided as electrical insulation.

Parallel resistance feature makes it suitable to be used for any length up to 200 Mtr. CTL type tracers are extensively useful for heating cold storage doors and pipe line heating.

· Can be cut to length on site

· Cold tail is included hence no extra connection is required.

· Suitable for 230V power supply.

· Available in 20 & 40 W/Mtr.

· Circuit length upto 65M for 20W/M and 50M for 40 W/M tracer.

Product Details:

Constant Watt Parallel Resistance (CTL) tracers are designed to deliver a constant power throughout the length irrespective of working temperature.

CTL tracers consist of nichrome wire heating element wound on two silicon rubber insulated copper bus conductors. Contact of heating element with bus wire is maintained at a specific distance by removing insulation for a short length. An overall silicon rubber sheathing is provided as electrical insulation.

Parallel resistance feature makes it suitable to be used for any length up to 200 Mtr. CTL type tracers are extensively useful for heating cold storage doors and pipe line heating.

· Can be cut to length on site

· Cold tail is included hence no extra connection is required.

· Suitable for 230V power supply.

· Available in 20 & 40 W/Mtr.

· Circuit length upto 65M for 20W/M and 50M for 40 W/M tracer.

Product Details:

In modern industries various types of fluids are stored and transported at an elevated temperature. This call for a heating system to compensate thermal losses during storage and transportation.

Tracer Tape acts as a low density heater extended over complete length of pipe line or surface to be heated. Its flexibility makes it suitable, particularly, where bends, valves and flanges are to be negotiated.

The tapes are manufactured and tested strictly in accordance with BS 6351 and has been type tested by government test house. The tapes are normally supplied to work at 230V but can be designed to work at any lower of higher voltage if desired.

Thermo- Tech offer complete services for

Feasibility Studies

Turn Key Job

Technical Design

Thermal Insulation.

Installation and Commissioning